Ericsson SPR1100 Operations Instructions download pdf (Page 59)

Getting Started

Figure 3.7 Specifying an Output Service

2. Enter the details of the Output Service, as required, in the Output Multicast

Selection dialog. This will create an output service with the default set of profiles:

a Specify whether to create a single output multicast, or a separate multicast

or each service.

b If you select single output multicast, by default a Reflex group is created

and all the services are created within this Reflex group. The maximum

number of services in a single Reflex group is 24. Uncheck the Add to a

Reflex Group box if you do not want a Reflex group created. You can

create the group later, if desired.

c Create an output multicast for each service by entering the relevant IP

settings for the output streams.

d Create audio components as required.

e Click the OK button to accept the new settings or click Cancel to abort the

operation.

3. You can now edit the service and component Profiles using the Properties pane,

described in Chapter 5 Web GUI Control. Remember that any settings that you

edit in the Properties pane will not be sent to the unit and activated until you

click the Apply All button.

4. Important: the input video format (HD or SD) is NOT detected automatically;

therefore, you MUST manually select the correct video input format in the Input

tab of the Video Reflex Component accordion.

2/1553-FGC 101 1400 Uen B

3-9

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 299 300

No comments

Ericsson SPR1100 Operations Instructions Page 59