Getting Started
3. Continue and set the subnet mask and gateway address in the same way, if
required, using the front panel keys as described above to modify each
parameter.
IP Addresses on the unit must adhere to RFC3330 range of restrictions as listed in
the following table of allocated IP addresses.
Table 3.1 IP Address Restrictions
Block Present Use Reference
0.0.0.0/8 This Network [RFC1700, p4]
10.0.0.0/8 Private-Use Networks [RFC1918]
14.0.0.0/8 Public-Data Networks [RFC1700, p181]
24.0.0.0/8 Cable Television Networks ---
39.0.0.0/8 Reserved but subject to allocation [RFC1797]
127.0.0.0/8 Loopback [RFC1700, p5]
128.0.0.0/16 Reserved but subject to allocation ---
169.254.0.0/16 Link Local ---
172.16.0.0/12 Private-Use Networks [RFC1918]
191.255.0.0/16 Reserved but subject to allocation ---
192.0.0.0/24 Reserved but subject to allocation ---
192.0.2.0/24 Test-Net ---
192.88.99.0/24 6 to 4 Relay Anycast [RFC3068]
192.168.0.0/16 Private-Use Networks [RFC1918]
198.18.0.0/15 Network Interconnect Unit Benchmark Testing [RFC2544]
223.255.255.0/24 Reserved but subject to allocation ---
224.0.0.0/4 Multicast [RFC3171]
240.0.0.0/4 Reserved for Future Use [RFC1700, p4]
Note: The control network and data networks should not conflict. It is suggested
that the ranges for these networks are in the Private-Use Networks as listed
in the summary Table. IP Address range 192.168.10.x (subnet
255.255.255.0) is used for internal unit communications, so should not be
used for external communications.
2/1553-FGC 101 1400 Uen B
3-5
Comments to this Manuals