Ericsson SPR1100 Operations Instructions Page 253

  • Download
  • Add to my manuals
  • Print
  • Page
    / 300
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 252
Technical Specification
B.1 IP Output Transport Stream
The following parameters are controllable for each IP Output transport stream for
each output port or ports depending on the redundancy mode that is selected.
Table B.1 IP Output Transport Stream
Parameter Description /
Range
Comment
Source IP Address aaa.bbb.ccc.ddd Source IP address
Subnet Mask aaa.bbb.ccc.ddd Source Subnet address
Source UDP Port 0 to 65535 Source IP Port Number
Destination IP Address aaa.bbb.ccc.ddd Destination IP address
Destination UDP Port 0 to 65535 Destination IP Port Number
Time To Live 0 to 240 TTL value for inclusion in the IP header
Type Of Service 0 to 255 ToS value for inclusion in the IP header
B.2 Control Ethernet Specification
B.2.1 Overview
The system has two Ethernet control ports that support IEEE 802.3 100BaseTX and
1000BaseT Ethernet protocols. The Control ports are accessible via RJ-45
connectors on the rear panel of the chassis and support IEEE 802.3u auto-
negotiation and parallel detection. Also, the ports support Auto-MDIX.
Table B.2 Control Ethernet Connector
Item Specification
Connector type RJ-45 (100/1000BaseT)
Connector designation Ctrl 1/2
Pin outs
(Unused pins are not
connected)
Pin 1 - Rx/Tx A(+)
Pin 2 - Rx/Tx A (-)
Pin 3 - Rx/Tx B (+)
Pin 4 - Rx/Tx C (+)
Pin 5 - Rx/Tx C (-)
Pin 6 - Rx/Tx B (-)
Pin 7 - Rx/Tx D (+)
Pin 8 - Rx/Tx D (-)
2/1553-
FGC 101 1400 Uen B
B-3
Page view 252
1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 299 300

Comments to this Manuals

No comments