Ericsson RX8000 Series User's Guide download pdf (Page 84)

Chapter 3

3.5.3.2.6.5 2.2.6.5 Row Port 1

To view and edit the Row Port 1, press the T (Down) key. The following screen is

displayed:

STREAM 1 |ROW PORT 1

2.2.6.4 |00000

To edit the Row Port 1 value:

1. Press the Edit key. The cursor appears below the first character of the displayed

value.

2. Edit the parameter value as required using the W (Back) and X (Forward) keys

to select each digit in turn, and then using the S (Up) and T (Down) keys to

increment or decrement the digit.

3. Press Save to save the new settings or Edit to abandon the operation and

return to the current setting.

This is the last of the Stream 1 screens. To return to the top level Stream 1 screen,

press the W (Back) key.

3.5.3.2.7 2.2.7 Stream 2/ Unicast Enable 2

To view and edit the Unicast Enable 2, press the T (Down) key. The following

screen is displayed:

STREAM 1 |UNICAST ENABLE 2

2.2.7 |TRUE >

The Unicast 2 may be enabled/disabled and all of the Stream 2 parameters viewed

and edited (where possible) as descibed in Section 3.5.3.2.6. When complete, press

the W (Back) Key to return to the top level Stream 2 screen.

3.5.3.2.8 2.2.8 Alarms/ Alerts

To view the unit alerts, press the T (Down) key. The following screen is displayed:

ALARMS |ALERTS

2.2.8 |Both ports link down, Both ports no data

3.5.3.2.8.1 2.2.8.1 Both Ports Link Down/ No Data

To view the port alerts, press the X (Forward) key. The following screen is

displayed:

ALARMS |BOTH PORTS LINK DOWN Alarm

2.2.8.1 |BOTH PORTS NO DATA Alarm

EN/LZT 790 0005 R1A

3-36

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 235 236

No comments

Ericsson RX8000 Series User's Guide Page 84