Ericsson RX8000 Series User's Guide download pdf (Page 78)

Chapter 3

This is the last of the Network 1 screens. To return to the top level Network 1 screen

press the W (Back) Key.

3.5.3.2.3 2.2.3 Network 2

From the Network 1 screen 2.2.2, press the T (Down) key. The following screen is

displayed.

NETWORK 2 |IP ADDRESS 2

2.2.3 |000.000.000.000 >

The Network address 2 may be edited and all of the Network 2 parameters viewed

and edited (where possible) as described in Section 3.5.3.2.2. When complete,

press the W (Back) Key to return to the top level Network 2 screen.

3.5.3.2.4 2.2.4 Setup/MAC Mode

To view and edit the MAC Mode, press the T (Down) key. The following screen is

displayed:

SETUP |MAC MODE

2.2.4 |Same >

To change the MAC Mode:

1. Press the Edit key. The cursor appears below the first character of the displayed

option.

2. Use the S (Up) and T (Down) keys to toggle between the Same and Different

options.

3. Press Save to save the new settings or Edit to abandon the operation and

return to the current setting.

3.5.3.2.4.1 2.2.4.1 De-Jitter Buffer Level

To view and edit the De-Jitter Buffer Level, press the X (Forward) key. The following

screen is displayed:

SETUP |DE-JITTER BUFFER LEVEL

2.2.4.1 |00500

To edit the De-Jitter Buffer Level:

1. Press the Edit key. The cursor appears below the first character of the displayed

option.

2. Edit the parameter value as required using the W (Back) and X (Forward) keys

to select each digit in turn, and then using the S (Up) and T (Down) keys to

increment or decrement the digit.

EN/LZT 790 0005 R1A

3-30

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 235 236

No comments

Ericsson RX8000 Series User's Guide Page 78