Ericsson RX8000 Series User's Guide Page 212

  • Download
  • Add to my manuals
  • Print
  • Page
    / 236
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 211
Annex B
B.2.2 MPEG Audio
The RX8000 Receiver supports decoding of MPEG audio as follows:
Compression layers: MPEG-1 layers I and II
Sampling rate: 48 kHz
Maximum compressed data rate: 384 kbps (layer II)
B.2.3 Dolby Digital AC-3 Audio
The RX8000 Receiver is able to decode and output the primary stereo pair of a
Dolby Digital AC-3 encoded audio stream. When there is data encoded on the audio
surround channels, the Decoder applies downmixing, so that either a surround
encoded stereo pair (LtRt downmix) or a conventional stereo pair (LoRo downmix) is
available at the output.
The RX8000 Receiver is not able to decode and output all 5.1 channels individually
as separate channels:
Sampling rate: 48 kHz
Maximum compressed data rate: 640 kbps
Note: Support for Dolby Digital decoding requires approval and licensing from
Dolby.
B.3 Audio Output Format
B.3.1 General
The RX8000 Receiver provides an independent stereo pair output for each audio
channel. Analogue audio is always output and the following digital audio formats can
be chosen from the User Interface and remote control interfaces:
AES3 format
B.3.2 Analogue Audio
The RX8000 Receiver supports level control of the audio outputs. Independent
control of each output of each stereo pair is provided via the User Interface and
remote interfaces.
Audio output connector type: 9 way female D-type
Output level: +20 dBm nominal clipping level. Selectable in range +12 to +24 dBm.
Output impedance: 50 Ω (nominal).
EN/LZT 790 0005 R1A
B-8
Page view 211
1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 235 236

Comments to this Manuals

No comments