Ericsson RX8000 Series User's Guide Page 211

  • Download
  • Add to my manuals
  • Print
  • Page
    / 236
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 210
Annex B
B.1.5 HD SDI Digital Video
HD SDI output supports:
Embedded Decoded Audios
Closed Captioning (EIA 708B)
VITC
VANC
Table B.7 Digital Video Output Connectors
Item Specification
Safety status SELV
Connector type
BNC, Female, 75 Ω
Connector designation
HD SDI 1
HD SDI 2
HD SDI 3
Output standard (USA) ANSI/SMPTE 292M
SDI output level
800 mV pk-pk nominal ±10%
Jitter Performance, Nominal
SMPTE Recommended Practices RP 192 –1996
Jitter Measurement Procedures in Bit-Serial
Digital Interfaces
B.2 Audio Decoding and Output Stage
B.2.1 General
The RX83xx Receiver is capable of simultaneously decoding two PES streams of
audio from the transport stream or the RX8200 is capable of decoding four PES
streams. Each of the decoders is identical in operation, but act independently of the
other.
Each channel supports extraction of the following types of coded audio from the
Transport Stream as follows:
MPEG-1, Layer 2 Audio (Musicam): ISO/IEC 13818-3
Dolby Digital AC-3 Audio: ATSC document A/52
Audio component selection is automatic or may be specified from the User Interface
or remote interfaces. The RX8000 Receiver automatically detects the audio type of
the selected audio component and applies the appropriate algorithm. Audio
component selection is based on the position of the component descriptor in the
PMT. Audio 1 takes the first component and Audio 2 the second. These may be
overridden by selecting User-specified component PIDs.
EN/LZT 790 0005 R1A
B-7
Page view 210
1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 235 236

Comments to this Manuals

No comments