Ericsson LIP-8002E Specifications

IP Phone Installer Guide LIP-8002/8002A SIP (Session Initiation Protocol) iPECS Please read this manual carefully befo

LIP-8002/8002A iPECS Installer Guide 4 2. Installing the LIP-8002/8002A 2.1 Connecting the IP Phone The figure below shows the cable connectio

LIP-8002/8002A iPECS Installer Guide 94 ;========================================================================= ;LIP-8002 configuration inform

LIP-8002/8002A iPECS Installer Guide 95 preferred_codec rtp_port outbound_proxy_register outbound_proxy_mode prack_mode user_param replaces

LIP-8002/8002A iPECS Installer Guide 96 jitterbuffer_max_delay dtmf key_tone [FWRD] ;Forwarding Configurations condition forwarding_address

LIP-8002/8002A iPECS Installer Guide 97 [SYSTEM] ;System Configurations phone_name lang lock_outgoing_call use_speed_number web_server_port

LIP-8002/8002A iPECS Installer Guide 98 Appendix E. Dial Pad Mode The LIP-8002/8002A dial pad inputs digits or alphanumeric characters for speci

LIP-8002/8002A iPECS Installer Guide 99 Appendix F. Auto Provisioning Routine General The LIP-8002/8002A incorporates software routines to automa

LIP-8002/8002A iPECS Installer Guide 100 After completing download of the configuration files, the IP Phone requests the software version file f

LIP-8002/8002A iPECS Installer Guide 101 download. The phone first requests the file “mac address”/IP_8002_VER_SIP2, if not found, the file IP_8

LIP-8002/8002A iPECS Installer Guide Dec. ‘08

LIP-8002/8002A iPECS Installer Guide 5 3 Power The LIP-8002 supports PoE. So, if the LAN port supports PoE, IEEE 802.3af compliant, Class 2, th

LIP-8002/8002A iPECS Installer Guide 6  Remove the Handset hook from the phone as shown in the figure below. Reverse the hook and re-install in

LIP-8002/8002A iPECS Installer Guide 7 o Default gateway address o Subnet mask Two methods are available for manual configuration. The LCD Con

LIP-8002/8002A iPECS Installer Guide 8 3. Using the LCD Configuration Menu This chapter provides detailed information to configure the LIP-8002

LIP-8002/8002A iPECS Installer Guide 9 Figure 3-2 LCD Configuration Menu 1. Network Configuration2. SIP Configuration1. Network Mode2. IP Addre

LIP-8002/8002A iPECS Installer Guide 10 3.1 Navigating the LCD Configuration Menu The IP phone must be idle to access the configuration menu and

LIP-8002/8002A iPECS Installer Guide 11 data displays while the menu is locked however, the menu must be unlocked using the password in order to

LIP-8002/8002A iPECS Installer Guide 12 3.4 Network Configuration Under Network Configuration are the Network mode (DHCP or static), various IP

LIP-8002/8002A iPECS Installer Guide 13  Press the digit, or move the cursor to 1.Network Configuration using the navigation buttons and pres

LIP-8002/8002A iPECS Installer Guide Copyright © 2010 LG-Ericsson Co., Ltd. All Rights Reserved This material is copyrighted by LG-Ericsson Co.,

LIP-8002/8002A iPECS Installer Guide 14  Press the Settings ( ) button. If the LCD Menu is locked, use the unlock procedure. Refer to section 3

LIP-8002/8002A iPECS Installer Guide 15 3.4.6 Secondary DNS Address With an FQDN assigned as any of the servers in the IP phone configuration, t

LIP-8002/8002A iPECS Installer Guide 16 3.4.8 VLAN Settings VLAN settings define the Ethernet frame priority and VLAN identification in accordan

LIP-8002/8002A iPECS Installer Guide 17 To assign the VLAN ID for the LAN (voice) port:  Press the Settings () button. If the LCD Menu is locke

LIP-8002/8002A iPECS Installer Guide 18 3.4.8.4 VLAN ID (PC) The VLAN ID (PC) assigns the identification for Ethernet frames for the IP Phone PC

LIP-8002/8002A iPECS Installer Guide 19  Press the digit, or move the cursor to 1.Call Server Address using the navigation buttons and press

LIP-8002/8002A iPECS Installer Guide 20  Press the digit, or move the cursor to 1.Line Configuration using the navigation buttons and press th

LIP-8002/8002A iPECS Installer Guide 21  Press the digit, or move the cursor to 1.Line Configuration using the navigation buttons and press th

LIP-8002/8002A iPECS Installer Guide 22 3.5.1.7 Registration Status The status of the line registration with the SIP call server can be viewed.

LIP-8002/8002A iPECS Installer Guide 23 3.5.2.2 Outbound Proxy Port With the Outbound Proxy Server defined, the associated port must be defined

LIP-8002/8002A iPECS Installer Guide ii Care & Precautions: Before connecting or using your new phone, take a moment to consider safety and

LIP-8002/8002A iPECS Installer Guide 24 3.5.2.4 Backup Proxy Port The Backup Proxy Port defines the port used when sending SIP messages to the b

LIP-8002/8002A iPECS Installer Guide 25 To assign an RTP Start Port:  Press the Settings () button. If the LCD Menu is locked, use the unlock p

LIP-8002/8002A iPECS Installer Guide 26  Press the digit, or move the cursor to 2.SIP Configuration using the navigation buttons and press the

LIP-8002/8002A iPECS Installer Guide 27  Move to another parameter with the navigation buttons and continue the session or press the Settings ()

LIP-8002/8002A iPECS Installer Guide 28 3.6.2 Ring Setting The IP Phone uses one of 4 ring signals (Ring Types) or no ring (“Ringer Off”) for in

LIP-8002/8002A iPECS Installer Guide 29 3.6.3 Ringer Off The IP Phones can be programmed not to ring when an incoming call is received. To set

LIP-8002/8002A iPECS Installer Guide 30  Press the digit, or move the cursor to 3.Phone Settings using the navigation buttons and press the OK

LIP-8002/8002A iPECS Installer Guide 31  Move to another parameter with the navigation buttons and continue the session or press the Settings ()

LIP-8002/8002A iPECS Installer Guide 32 3.6.5.4 Time Format The format of the LCD time display can be set to display time in the 12-hour format

LIP-8002/8002A iPECS Installer Guide 33 3.6.6 S/W Update Within the S/W Update selection, the type of provisioning (TFTP/HTTPS), the Server Addr

LIP-8002/8002A iPECS Installer Guide iii Table of Contents 1. Introducing the LIP-8002/8002A ...

LIP-8002/8002A iPECS Installer Guide 34  Press the digit, or move the cursor to 2.TFTP Server Address using the navigation buttons and press

LIP-8002/8002A iPECS Installer Guide 35 3.6.6.3.2 Username In some cases, the HTTP/HTTPS server requires a Username (Id) and Password for authen

LIP-8002/8002A iPECS Installer Guide 36 Changing the Password requires a reboot of the IP Phone; when you leave the menu, you will receive a re

LIP-8002/8002A iPECS Installer Guide 37  Press the digit, or move the cursor to 6.S/W Update using the navigation buttons and press the OK bu

LIP-8002/8002A iPECS Installer Guide 38 To set the DHCP Options flag:  Press the Settings () button. If the LCD Menu is locked, use the unlock

LIP-8002/8002A iPECS Installer Guide 39 3.6.8 Speed Number LIP-8002/8002A includes a Phone Book that supports up to 100 entries. Each Phone Boo

LIP-8002/8002A iPECS Installer Guide 40  Press the digit, or move cursor to 3.Phone Settings using the navigation buttons, and press the OK b

LIP-8002/8002A iPECS Installer Guide 41 If Call Waiting is disabled, the IP Phone will reject the new call. The call server configuration deter

LIP-8002/8002A iPECS Installer Guide 42  Press the digit, or move the cursor to 4.Call Hold Ringback using the navigation buttons and press th

LIP-8002/8002A iPECS Installer Guide 43 3.7.7 Caller ID Blocking The IP Phone normally sends the assigned display name as the SIP caller id for

LIP-8002/8002A iPECS Installer Guide iv 3.6.2.2 Trunk Ring Type...

LIP-8002/8002A iPECS Installer Guide 44 3.8.1 Dialing from the Phone Book To dial a number from the Phone Book:  Press the Settings () button.

LIP-8002/8002A iPECS Installer Guide 45  Press the digit, or move the cursor to 9.Reboot using the navigation buttons, and press the OK button

LIP-8002/8002A iPECS Installer Guide 46 4. Using Web Manager for Configuration The Web Manager is a web-based tool for configuring the IP Phone

LIP-8002/8002A iPECS Installer Guide 47  Click LOGIN; the password page displays as below.  Enter a valid User name and Password to

LIP-8002/8002A iPECS Installer Guide 48 4.2 VoIP Configuration Figure 4.2-1 VoIP Configuration

LIP-8002/8002A iPECS Installer Guide 49 Within the VoIP screen, adjustable parameters are: - Line based parameters o Proxy Server Address is t

LIP-8002/8002A iPECS Installer Guide 50 o Start RTP Port is the port for Real-time Transport Protocol (voice) packets. o SRTP can use the Secure

LIP-8002/8002A iPECS Installer Guide 51 4.3 LAN Configuration Figure 4.3-1 LAN Configuration When the WiFi Module is installed, refer to sectio

LIP-8002/8002A iPECS Installer Guide 52 To modify any of the addressing information  Select the appropriate box and enter the new value. Chang

LIP-8002/8002A iPECS Installer Guide 53 4.4 Call Preferences Figure 4.4-1 Call Preferences The IP Phone supports various user preferences as

LIP-8002/8002A iPECS Installer Guide v 4.10 Call Log...

LIP-8002/8002A iPECS Installer Guide 54 o Call Waiting Function, when enabled, visually notifies the user of an incoming call while in a convers

LIP-8002/8002A iPECS Installer Guide 55 4.5 Dial Plan The IP Phone incorporates a Dial Plan, which monitors the user-dialed digits for pattern

LIP-8002/8002A iPECS Installer Guide 56 - Pre defines digits to insert in the front of the truncated number. - Post defines the digits to insert

LIP-8002/8002A iPECS Installer Guide 57 4.6 Phone Information Figure 4.6-1 Phone Information The Phone Information screen displays the version

LIP-8002/8002A iPECS Installer Guide 58 4.7 Phone Settings Figure 4.7-1 Phone Settings In the Phone Settings screen, the following parameter

LIP-8002/8002A iPECS Installer Guide 59 o DTMF Payload sets the RFC 2833 payload type for DTMF signals. o DTMF Duration sets the duration of DTMF

LIP-8002/8002A iPECS Installer Guide 60 4.8 Phone Book Figure 4.8-1 Phone Book The IP Phone includes a Phone Book with 100 contact records.

LIP-8002/8002A iPECS Installer Guide 61 Figure 4.8-2 Add a Phone Book Entry  When complete, select the button to store the record. To modi

LIP-8002/8002A iPECS Installer Guide 62 An example Phone Book and resulting file are shown below. Phone Book Speed Number Name Phone Number In

LIP-8002/8002A iPECS Installer Guide 63 4.9 Flexible Button Figure 4.9-1 Flexible Button The LIP-8002/8002A has 4 flexible buttons. The butto

LIP-8002/8002A iPECS Installer Guide 1 1. Introducing the LIP-8002/8002A 1.1 The IP Phone LIP-8002/8002A Overview The LG-Ericsson IP phone (LIP

LIP-8002/8002A iPECS Installer Guide 64 4.10 Call Log Figure 4.10-1 Call Log The Call Log is a list of all calls (incoming, outgoing or misse

LIP-8002/8002A iPECS Installer Guide 65 4.11 Network Time Configuration Figure 4.11-1 Network Time Configuration

LIP-8002/8002A iPECS Installer Guide 66 The Network Time screen allows you to set up the configuration for time and daylight savings time. With

LIP-8002/8002A iPECS Installer Guide 67 4.12 Upgrade Configuration Figure 4.12-1 Upgrade Configuration In the Upgrade screen, the results of

LIP-8002/8002A iPECS Installer Guide 68 o TFTP Server Address assigns the IP address or FQDN of the TFTP server where configuration and software

LIP-8002/8002A iPECS Installer Guide 69 4.13 QoS Configuration Figure 4.13-1 QoS Configuration Diffserv Configuration On the QoS screen, the

LIP-8002/8002A iPECS Installer Guide 70 priority, handling higher priority packets first. However, at congested routers, higher priority packets

LIP-8002/8002A iPECS Installer Guide 71 4.14 Load Default Figure 4.14-1 Load Default The Load Default page permits the IP Phone configuratio

LIP-8002/8002A iPECS Installer Guide 72 4.15 Reboot Figure 4.15-1 Reboot The Reboot screen is used to reboot the IP Phone manually. To reboo

LIP-8002/8002A iPECS Installer Guide 73 5. TroubleShooting 5.1 Information The LIP-8002/8002A provides the means to quickly view the Network pa

LIP-8002/8002A iPECS Installer Guide 2 Phone Book Private line Private Hold Speakerphone, full duplex Speed dial buttons Speed number dialing Sta

LIP-8002/8002A iPECS Installer Guide 74 5.2 Troubleshooting Guide Table 5.2-1 Troubleshooting Symptom Corrective Action LCD Off 1. Switch pow

LIP-8002/8002A iPECS Installer Guide 75 Appendix A. Factory Default Configuration Factory default configurations are settings for the configurat

LIP-8002/8002A iPECS Installer Guide 76 Config File Section Name Parameter/Field Default Value SRTP Crypto Suite* AES_CM_128_HMAC_SHA1_80/

LIP-8002/8002A iPECS Installer Guide 77 Config File Section Name Parameter/Field Default Value telnet_server** enabled Phone password Not assi

LIP-8002/8002A iPECS Installer Guide 78 NOTE: Parameters marked with an asterisk, , cannot be modified via the LCD Configuration Menu. Parame

LIP-8002/8002A iPECS Installer Guide 79 Appendix B. LIP-8002/8002A Specification Table B-1 provides the basic specifications of the IP Phone. Ta

LIP-8002/8002A iPECS Installer Guide 80 Appendix C. Download LCD Messages Table C-1 provides the messages displayed for the most recent software

LIP-8002/8002A iPECS Installer Guide 81 Appendix D. Using the Configuration File During automated provisioning with the Config. Download flag, se

LIP-8002/8002A iPECS Installer Guide 82 Table D-1 Configuration Parameters Section Field Name Description network_mode Sets use of DHCP or static

LIP-8002/8002A iPECS Installer Guide 83 Section Field Name Description pc_vlan_id Assigns unique identifier of the VLAN for the PC port. A ‘0’ d

LIP-8002/8002A iPECS Installer Guide 3 Number Function Left button - Move to the previous menu in the settings menu. Right button Up button - Wh

LIP-8002/8002A iPECS Installer Guide 84 Section Field Name Description dst_stop_week_of_month Sets week of month DST ends. Valid values are 1 t

LIP-8002/8002A iPECS Installer Guide 85 Section Field Name Description local_tcp_port Defines local TCP port used for SIP messages. Valid values

LIP-8002/8002A iPECS Installer Guide 86 Section Field Name Description de_register Enables de-registration of each line during a reboot prior to

LIP-8002/8002A iPECS Installer Guide 87 Section Field Name Description ring_type Specifies the default ring type for the IP Phone. Ring type can

LIP-8002/8002A iPECS Installer Guide 88 Section Field Name Description cadence7 Sets the ring cadence for calls with community-1 call in Alert In

LIP-8002/8002A iPECS Installer Guide 89 Section Field Name Description dtmf Sets the method to determine RFC 2833 payload type. Valid values are

LIP-8002/8002A iPECS Installer Guide 90 Section Field Name Description digitmap_process Defines the digit map process for a dial plan. Valid valu

LIP-8002/8002A iPECS Installer Guide 91 Section Field Name Description call_waiting_tone Controls audible notification when Call Waiting is enabl

LIP-8002/8002A iPECS Installer Guide 92 Section Field Name Description function onetouch_pickup Enables call answer or resume from hold by pressi

LIP-8002/8002A iPECS Installer Guide 93 Section Field Name Description https_macform Specifies the filename of phone specific configuration file.