Ericsson GH388/GF388 User Manual download pdf (Page 34)

b. Store the number in the selected position,

thus erasing the old number (and name).

Press YES.

Card memory full

If you try to store a phone number when all

positions are occupied, a position number in the

Phone memory will be suggested in the top line

of the display.

Both memories full

If both memories become full, no position

number will be suggested,

If you do wish to store the phone number, you

have to enter the number of an already occu-

pied position, thus erasing the old number

(and name).

To recall a phone number using the

name –

Name recall

To recall a phone number using the

position –

Position recall

To store a phone number –

Store

Storing phone numbers in the Card memory,

and recalling phone numbers from the Card

memory, is described in the Basic Guide.

If you wish to store a phone number in the

Phone memory, press # to enter the ¤ charac-

ter. For example, press # followed by 1 to store

a phone number in memory position ¤1. The

same applies when you recall a phone number

using Position recall.

The procedure for recalling a phone number

using Name recall is the same, regardless of

whether the phone number is stored in the Card

or Phone memory.

Alternative method to recall a phone number

using the name

Press CLR to erase any digits from the display.

Press , followed by a numeric key and YES.

For example, to recall a name beginning with A,

press the 2 key. To recall a name beginning with

E, press the 3 key twice.

If the name displayed is not the desired one,

scroll with or .

To change a phone number, name or

storage position –

Edit

Enter the Phone book menu and select Edit.

a. Enter the position number and press YES.

b. If you wish to enter the name, press .

Enter the full name and press YES.

You can now change the position number (in

the top line), the name (in the middle line) or the

phone number (in the bottom line). You can

move the cursor to the desired line with /

and then make the changes. Use the CLR key

to erase. When you are finished, press YES.

If you did not change the position number, the

message Used Overwrite? is displayed, indi-

cating that the edited name or phone number

will be stored in its old position. Press YES.

To erase a phone number –

Erase

Enter the Phone book menu and select Erase.

Menus

34 EN/LZT 126 1298 R1A

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 50 51

Comments to this Manuals

No comments