Ericsson G36 User Manual download pdf (Page 24)

Communications systems built to drive business ahead

MD Evolution 8.1

Product News

PN 06:16 Rev A 2006-10-20

Created by ESF/KEP/MA Francois Vaillant

o Plug the country specific Flashcard in the system in place of the

normal one. Switch the system on. Check that the system is running

the software from the Compact Flashcard (DS3 led must be fixed

switched on).

o If yes, don’t touch the system until the end of the localization.

o If not, wait for DS2 green led to switch from slow blinking (200

ms/800 ms) to a regular one (500 ms/500 ms) and then press on

S2 button to switch from resident memory to Flashcard. The system

is restarting (DS3 green led must be fixed switched on). Don’t touch

the system until the end of the localization.

o During localization (DSP software update and database re-

initialization), DS1 red led is blinking. The system is up running

before the complete DSP download (normal green blinking of DS2

but still DS1 red led blinking) but tones are not available.

o When the system is back to normal operation: DS2 green led is

blinking at ‘normal operation’ rhythm 500ms/500ms and DS1 stop to

blink unless an alarm is detected, you can switch it off and replace

the Flashcard by a standard one.

5.5.2 New deliverable administration tools

New MDE administration tools are introduced with the new version 8.1:

- The tool SCR8.10 has been updated with the introduction of new

parameters. The database format between version 8.0 and 8.1 is changed.

Then this new SCR8.10 is required for updating or upgrading an installed

system.

- The tool TLG8.10 covers all new parameters with version 8.1. As

previously, the TLG8.10 can also manage all previous MDE versions. All

procedures for upgrading CPU software and XMV/XIP software are

unchanged. Refer to the two documents "Upgrades procedures" and

"general procedures" in the MDE Administration CD-ROM.

The new version 8.1 consists of several software packages available on the

Ericsson web sites:

- The CPU software V8.1 is identified by the release number D0xx (for

instance D006 or later). The previous software V8.0C was identified by the

release Cxxx (for instance C128). The CPU software license applies to

both MDE V8.0A , V8.0C and V8.1. The consequence is that updating of

an installed version 8.0A/8.0C is now done with release D0xx. The new

CPU software V8.1 includes all XMV functions. And voice server and IP

gatekeeper can co-exist.

- The new software XMV5.2.1 is supported by the CMV/SMV/EMV boards.

Associated wizard is available with XMV5.2.1 for upgrading.

- The new software XIP5.2.1 is supported by the new boards CIP/EIP.

Identification of software XMV5.2.1 and XIP5.2.1 are different due to the

Compact Flash cards that are different for CMV/SMV/EMV and CIP/EIP

boards.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31

Comments to this Manuals

No comments

Ericsson G36 User Manual Page 24

Comments to this Manuals

Related products and manuals for Networking Ericsson G36