Ericsson GDC-500H Installation Guide download pdf (Page 32)

iPECS eMG80

System DECT Installation Guide Issue 1.0

3.6.5 User Unsubscription II

If you want to perform the unsubscription procedure at wireless terminal and Attendant station

independently, follow the procedure described below.

To erase all subscriptions from Attendant Station:

1. At the Attendant station, press the [TRANS/PGM] button; the [TRANS/PGM] LED will

flash (60 IPM) and [ON/OFF] LED will be turned on.

2. Dial 0#.

3. Press the FLEX7 button.

4. Enter the appropriate password (147*).

5. Press the [HOLD/SAVE] button; a confirmation tone will be heard.

To erase one subscription from Attendant Station:

1. From the wireless terminal, press the [TRANS/PGM] button.

2. Dial 0#.

3. Press the FLEX8 button.

4. Enter the appropriate Station Number.

5. Press the [HOLD/SAVE] button; a confirmation tone will be heard.

Condition

1. Wireless terminal must be unsubscribed from the system for normal service.

2. Only an Attendant can unsubscribe a wireless terminal.

3. Attendant can unsubscribe another wireless terminal after completing the subscribing

procedure; if attendant attempts to unsubscribe an unsubscribed wireless terminal, an

error tone will be heard.

To erase the subscription when using a GDC-450H/GDC-500H wireless terminal.

1. At the wireless terminal (GDC-450H/500H), press the [MENU] button.

2. Select the ‘Phone Register’ menu.

3. Select the ‘Subscription’ menu.

4. Select the base number from which to unsubscribe.

5. Press [R/C] button for longer than 1 second.

6. Press [OK] to confirm.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 44 45

No comments

Ericsson GDC-500H Installation Guide Page 32