Ericsson Orion Installation Manual download pdf (Page 64)

Master Radio Programming

Decide which radio unit shall be the Master Unit. For shop programming, setup

the Master radio unit for programming as described in the Service Manual or in

the ProGrammer On-Line Help. For field programming, setup the Master radio

unit for programming as shown in Figure 49. THE SLAVE RADIO MUST

BE DISCONNECTED. Program the Master radio and control unit with the

control configurations shown in Table 1.

Slave Radio Programming

Decide which radio unit shall be the Slave radio unit. For shop programming,

setup the Slave radio unit for programming as described in the Service Manual or

in the ProGrammer On-Line Help. For field programming, setup the Slaver radio

unit for programming as shown in Figure 50. THE MASTER RADIO

MUST BE DISCONNECTED. Program the Slave radio unit with the control

configurations shown in Table 1.

Table 1 – Dual Radio Control Configuration Programming

NETWORK OPTIONS

Dual Control Disable

Speaker Disable

Multiple Radio Enable

Radio type Slave or Master

Power Up Volume 5

Mute Time Out 30.0

Termination Enable

Display Selected for Master radio only

Power Up Enable for Master radio only

Power Up Radio Enable for Master radio only

Receive Emergency Enable for Master radio only

Receive Only Enable for Master radio only

MuRPS Disable for Master radio only

PROGRAM RADIO SETUP

Mobile Options Push Button

ORION OPTIONS

Write Orion System Keypad File Enable (System control unit)

Write Scan Keypad File Enable (Scan control unit)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 79 80

No comments

Ericsson Orion Installation Manual Page 64