Ericsson CF768 User Manual download pdf (Page 14)

Not for commercial use - Ericsson Inc.

Some menus/features are operator dependent.

Making sure that the screw is going through both the

plastic clip and the metal support guide, insert the

screw into the opening on the back of the phone.

Using the screwdriver, turn the screw clockwise until

it is secure. Do not overtighten the screw.

Insert the two smaller prongs first and replace the flex-

ible rubber plug at the top of the clip.

Step 4: Connecting the Charger

Note! Have the battery attached to the phone and connect the

charger as shown below. Use the power plug that fits

your electrical outlet.

With the lightning bolt on the charger, and the phone,

facing upward, insert the plug in the hole on the right.

Disconnecting the Charger

Lift the plug up and pull it out.

Note! Do not twist the charger during disconnection.

Step 5: Connecting the Charger to an Electrical Outlet

Connect the cord to the charger and plug the charger

into an electrical outlet. The phone now starts to charge

the battery and you can see the battery meter in the dis-

play empty and fill while charging.

About the Charging Function

When you connect external power to the phone, the bat-

tery begins charging. When the battery is fully charged,

the charging stops.

Note! You cannot overcharge your battery when using Ericsson

accessories.

Note! Your phone will still charge if powered

OFF.

When you are charging the battery, you can use your

phone as you usually would; however, the charging time

will be longer.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

Ericsson CF768 User Manual Page 14