Ericsson C3 MAESTRO LBI-39055 User Manual

ericssonzericssonzLBI-39117INSTALLATION AND SET-UP MANUALC3 ADVANTAGE DISPATCH SYSTEMTABLE OF CONTENTSPageGENERAL...

LBI-3911710correctly at the System Manager. Refer to the EDACSSystem Manager user guide, LBI-38984, and the CEC/IMCDigital Audio Switch Installation,

LBI-3911711❏ If necessary, change the MIM's site assignmentnumber to match the site's Site ID number bysetting the binary equivalent at SW1

LBI-3911712Conventional Interface BoardsCI Boards within the CIA Card Cage – Card Cage 2 –have one 8-position DIP switch which allows configurationof

LBI-3911713❏ TDM Slot Configuration – See Table 3 forrecommended TDM bus time slot allocations.Typically, a console only requires one (1) slot;however

LBI-3911714❏ Set-Up At The Consoles – At each C3 Maestroconsole, build communication modules by adding aunit or group to each module as required. See

LBI-3911715NOTEAt this point in the set-up process, if theNETCLOCK/2™ option is enabled, time display atthe console(s) and error/warning logging times

LBI-39117 CABLE INTERCONNECTIONS16Figure 5 – Card Cage 1, Slots 1 - 5 (MIM)

CABLE INTERCONNECTIONS LBI-3911717Figure 6 – Card Cage 1, Slots 6 - 11 (CIM 1 - 3)

LBI-39117 CABLE INTERCONNECTIONS18Figure 7 – Card Cage 1, Slots 12 - 14 (LRIM)

CABLE INTERCONNECTIONS LBI-3911719Figure 8 – Card Cage 1, Slots 15 - 17 (VMIM) And Card Cage 2 (CIA Rack), Slots 2, 3 and 5 (CCI and CI Boards)

LBI-391172TABLE OF CONTENTSPageINITIAL MOM CONFIGURATION...

LBI-39117 CABLE INTERCONNECTIONS20Figure 9 – Card Cage 1, Slots 18 - 21 (MOM)

DIP SWITCH SETTINGS LBI-3911721COMPACT CEC CONTROLLER BOARD ANDAUDIO BOARD DIP SWITCH SETTINGS(188D6170, Sh. 2, Rev. 1)

LBI-39117 CONCENTRATOR CARD PIN-OUTS22Cabinet 01 A01 Concentrator Card AUDIO Connections (To/From External Connections)---- PINS ---- ------------

CONCENTRATOR CARD PIN-OUTS LBI-3911723Cabinet 01 A02 Concentrator Card CONTROL Connections (To/From External Connections)---- PINS ---- -------J11

LBI-39117 CONCENTRATOR CARD PIN-OUTS24Cabinet 01 A03 Concentrator Card AUDIO Connections (To/From External Connections)---- PINS ---- ------------

PUNCH BLOCK PIN-OUTS LBI-3911725NOTEDO NOT install bridging clips.PUNCH BLOCK PB1EDACS Site Audio (COLUMN AB) AndConventional 2/4-Wire Audio/Control S

LBI-39117 PUNCH BLOCK PIN-OUTS26PUNCH BLOCK PB2Console Control Data And EDACS Site Uplink/Downlink Control Data (COLUMN AB)(COLUMN CD Not Used)(188D61

PUNCH BLOCK PIN-OUTS LBI-3911727DO NOT install bridging clips.PUNCH BLOCK PB3Console Audio (COLUMN AB) AndLogging Recorder Audio (COLUMN CD)(188D6170,

Ericsson Inc.Private Radio SystemsMountain View RoadLynchburg, Virginia 245021-800-528-7711 (Outside USA, 804-528-7711) Printed in U.S.A.

LBI-391173GENERALThe intent of this manual is to guide field installationand test personnel through the installation and set-up of theCompact CEC and

LBI-391174this design, one module can completely fail without"downing" the Compact CEC.Since each module has its own power cord, two (2)sep

LBI-391175Terminator Boards are plugged onto the appropriateBackplane connectors at the factory. No changes to theseboards should be required at insta

LBI-391176Telephone LinesCompact CEC audio channels should employ high-quality low-noise phone lines or equivalent microwavecircuits. All audio channe

LBI-3911774. Connect the two (2) ac power cords, one fromeach ac outlet strip, to an appropriate ac powersource.5. Simultaneously switch both power sw

LBI-391178screen can be accessed using the function keys andthe structured window selection method from the"SYSTEM DISPLAY" screen or by usi

LBI-391179• For each entity, the "PRVLG" (privilege) mustbe set to "Y" (Yes) so it may be programmedinto a communication module.•