Ericsson G36 User Manual download pdf (Page 55)

Fixed Wireless Terminal: G32 & G36 55

Web-based Configuration

This chapter describes the interface and user settings (volume, ringing

signals, dial speed setups etc) that are available and the procedures for

the use of your PCs standard modem to make data calls (Internet

browsing, e-mail, etc.) through the FWT line interface. To be able to

send and receive data calls, you need:

•

A PC equipped with an analog modem and the appropriate com-

puter program (Web Browser, E-mail, etc).

•

A SIM card that supports data transmission over the GSM network.

Note: If you do not have a modem in your PC, the FWT can be

configured to act as a modem. Please refer to the topic Connect-

ing PCs documented on page 21 for more detailed information.

To be able to access the User Interface settings the following steps

must be followed:

•

Open your Web Browser on your PC, and type the following default

URL: http://192.168.1.1/default.asp

•

The following configuration page will be displayed.

Note: Use PDP context 6 to access the web-based configuration

pages on the FWT, e.g. *98*06#.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 83 84

No comments

Ericsson G36 User Manual Page 55