Ericsson EDACS LBI-39169 Installation Manual download pdf (Page 48)

LBI-39171 CUSTOMIZING THE NETWORK MANAGER SOFTWARE

7.6.1 Community Names

The OpenView Network Node Manager (NNM) must be setup with the same community names for accessing the

EDACS elements as the EDACS elements have programmed in them. A community name is similar to a password and both

sides need to expect or use the same password.

1. Select “Options->SNMP Configuration” from the OpenView main menu bar. This will open up the “SNMP

Configuration” window.

2. Select Default “Global Default” with left mouse button to populate OpenView SNMP Parameters.

3. For each device listed in the CEC/IMC/RCEC section of the Network Manager Survey, enter the following data:

• In the “Target” field, enter the device’s IP Address.

• In the “Community” and the “Set Community” fields, enter the Community Name that will be

programmed into the remote element.

NOTE:

We recommend using “

edacs

” as the default

Community Name.

4. Click on the

ADD

button to add the data.

5. Click on the

APPLY

button to save changes. The specific Nodes Section of the window should display the

information just added

6. Repeat items 3 through 5 for each remote device listed in the Network Manager Survey.

7. Click on

CANCEL

to exit the SNMP Configuration window.

7.6.2 Fault Propagation

In addition, propagation of faults are customizable.

1. Select

File->Describe/Modify Map

from the OpenView main menu bar. This will popup the map description

window.

2. Select “Propagate Most Critical” and press the OK button. This will propagate the most severe status up to

parent icons.

7.6.3 Disable IP Map Polling

1. Select

Options->Topology/Status Polling: IP...

2. Turn off - Polling Master Switch, display responds: OK.

3. Select

File->Exit

to close OpenView.

7.6.4 Event Configuration

The OV_Set_Status_Color must be set to “Don’t Log or Display.” This will reduce the chance of over filling the Event

Log under heavy loading conditions (large number of elements) and improves the system performance.

1. From the OpenView Menu bar, select

Options->Event Configuration: SNMP

. OpenView will display the

Event Configuration window.

2. In the Enterprise Identification box, select the “

OpenView

” enterprise. The window will display the events

associated with this selection.

3. In the Event Identification box, select the “

OV_Set_Status_Color

” event.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 115 116

Comments to this Manuals

No comments

Ericsson EDACS LBI-39169 Installation Manual Page 48

Comments to this Manuals

Related products and manuals for Telephones Ericsson EDACS LBI-39169