Ericsson HM210di User's Guide download pdf (Page 31)

Basic Configuration

EN/LZT 108 6492 R2 - October 2003

5. Select Admin > Commit & Reboot and click the Commit button to

store your changes to permanent memory.

6. You may need to create a new WAN interface, or modify an existing

interface, so that it uses the new VC. See the instructions in the

following sections for configuring a PPP (section 5.2), EoA (section

5.3) or IpoA (section 5.4) interfaces, depending on the type you use

to communicate with your ISP.

5.1.2 Modifying ATM VCs

Your device may already be preconfigured with the necessary ATM VC

properties, or the table may contain placeholder values that you must

change before using the device. Contact your ISP to determine your ATM

VC values. Follow these instructions to modify a preconfigured VC:

1. From the ATM VC Configuration page, click

in the “Actions”

column for the interface you want to modify. The ATM VC Interface

– Modify page displays.

2. Enter the new VPI and VCI values, select the Mux Type, or change

the maximum number of protocols that the VC can carry, as

directed by your ISP.

You cannot modify the interface type over which an existing VC

operates (aal5-0, for example). If you want to change the interface

type, you must delete the existing interface, create a new one, and

select the desired interface type.

3. After entering the fields above, click the Submit button and when

the confirmation page appears, click Close.

4. Select Admin > Commit & Reboot and click the Commit button to

store your changes to permanent memory.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 134 135

No comments

Ericsson HM210di User's Guide Page 31