Ericsson A1228d User Manual download pdf (Page 11)

Not for commercial use – Ericsson Inc.

Getting Started 9

Align the small plug on the charger cord with the con-

nector on the bottom of your phone. The connector

on the phone is above the lightning bolt symbol.

Press the plug into the connector until the plug

“snaps” into place. The battery icon is alternated with

the icon.

Note! Do not twist while inserting or removing the small plug

on the charger cord!

Continue charging the phone until the battery is fully

charged.

Note! The battery is being charged when the battery icon is

alternating with the icon. The battery is fully

charged when the icon is constant.

To disconnect the charger, lift the plug connected to

the phone upwards (1) and pull it out (2).

Charge-Only Mode

If your phone is off, attaching the charger will cause the

phone to activate in charge-only mode. When this mode

is activated the message Charging Only appears in

the display. Your phone is now fast (rapid) charging the

battery. When your battery is fully charged, Battery

Charged appears in the phone’s display.

Note! You cannot make or receive calls when your phone is in

charge-only mode.

Slow (Trickle) Charging a Deeply

Discharged Battery

The battery may become deeply discharged (for exam-

ple, when the battery is stored for a long period). As a

result, the phone may not activate charge-only mode

when the charger is connected.

Attach the charger to the phone for several hours to

slowly charge (trickle charge) the battery.

After trickle charging the battery for several hours the

phone should activate the charge-only mode automat-

ically.

Continue charging the phone until the battery is fully

charged.

Note! If the phone is in charge-only mode, Battery

Charged appears in the display when the battery is

fully charged.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 26 27

No comments

Ericsson A1228d User Manual Page 11